Duplex Steel S32205 Flanges

Duplex Steel S32205 Flanges, ASTM A182 S32205 Duplex Slip On Flange, ASME SA182 Duplex Steel F60 Blind Flange, Duplex Steel S32205 Pipe Flange, Duplex Steel S32205 Plate Flange Supplier in Mumbai, India.

Duplex Steel S32205 Flange

Duplex Steel UNS S32205 Flanges are austenitic and ferritic stainless steel flanges. it has superior corrosion resistance and high strength properties. These flanges have better-localized corrosion resistance than the type of standard ferritic and austenitic alloys. These flanges are applied in the industrial fields like marine water desalination plant, chemical processing, seawater pump, and so on. Champ Steels supplies in different treated surface and machining allowances.

UNS S32205 is far better than standard stainless steel grades. In general acidic environments, it offers good resistance, where the acid content is low.

The High-temperature strength is similar to the type of standard grades in the range of 950 deg C to 1150 deg C. However, this alloy displays a rapid increase in the strength in down temperature up to 900 deg C. considering cold workability, precautions is required as proof stress is high and elongation is low in this type of grade.

The Solution annealing of UNS S32205 should be performed at 1040 deg C and above, it is followed by being quenching within water or rapidly cooled by other air.

Duplex Steel 1.4462 Ring Type Joint Flange Exporter, Duplex 2205® Weld Neck Flange, UNS S32205 Socket Weld Flange, Duplex Steel S32205 Orifice Flange, DIN 1.4462 Lap Joint Flange, F60 Duplex Stainless Steel Industrial Flanges Manufacturer in India.

Those are specification guide, stamping details, MTC report as per EN 10204 3.1 or 3.2, fumigation certificates, attested certificate by suppliers, heat treatment charts, commercial invoice, and raw material test report. Other reports are mill test report, quality assurance plan, and NABL test report, guarantee letter, etc.

Buy Duplex Steel UNS S32205 Flanges from us and get exciting offers.

Equivalent Grades
Duplex Steel S32205 1.4462 S32205

Specifications : ASTM A182 / ASME SA182

Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Size : 1/2" (15 NB) to 48" (1200NB)

Class/Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Flange Face Type : Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Type : Slip on flanges, Socket weld flanges, Forged flanges, Blind flanges, Welding neck flange, Ring type joint flange, Spectacle blind flange, Reducing flange, Threaded / Screwed flange, Tongue and Groove flange, Long weld neck flange, Flat flange, Industrial flanges, Plate flange, ASME B16.5 flanges.

Types Of Duplex Steel Flanges

Duplex Stainless Steel S32205 Flange

Duplex Steel S32205 Pipe Flange

Duplex Steel S32205 Blind Flange | Duplex Steel S32205 Socket Weld Flange | Duplex S32205 Long Weld Neck Flanges | Duplex Steel S32205 Spectacle Blind Flanges Stockist | Duplex Steel F60 Screwed Flange | S32205 Duplex Steel Tongue & Groove flange | SAF S32205 Flat Face Flanges | Duplex Steel S32205 Male-and-Female Flange | Duplex Steel S32205 SWRF Flange | SAF S32205 Slip On Flange

Duplex S32205 Slip On Flange

Duplex Steel 1.4462 Threaded Flanges | Duplex S32205 Orifice Flange | Duplex Steel 1.4462 Reducing Flanges | UNS S32205 Forged Flange Stockholder | Duplex S32205 Steel Raised Face Flange | ANSI B16.5 Duplex S32205 M&F Flange | Duplex S32205 Industrial Flanges | Duplex S32205 Lap Joint Flange | Duplex Steel S32205 Weld Neck Flange | ASTM A182 Duplex Steel F60 WNRF Flange | Duplex S32205 SORF Flange

Duplex S32205 Slip On Flanges
Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
S32205 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 22.0 – 23.0 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20 63.72 min
Mechanical Properties
Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S31803 7.805 0.285 1420 – 1465 2588 – 2669
Application Industry

Application Industry
  • 1
    UNS S32205 Slip On Flange

    used in Oil Refinery Industry

  • 2
    DIN 1.4462 RTJ Flanges

    used in General Piping Industry

  • 3
    SUS S32205 Weld-neck Flanges

    used in Gas Processing Industry

  • Chemical Industry
  • Oil & Gas Industry
  • Petrochemical Industry
  • Power Genration Industry
  • Sugar Industry
  • Food Processing Industry
  • Paper & Pulp Industry
  • Offshore and Onshore Services
People Also Searched For

duplex steel s32205 screwed flange, astm a182 duplex steel s32205 weld neck flange manufacturer in india, astm a182 s32205 duplex steel blind flange, duplex steel 1.4462 flat face flanges stockholer, duplex steel s32205 forged flange, s32205 duplex steel socket weld flange, duplex steel s32205 orifice flange, s32205 duplex steel pipe flange, duplex steel s32205 rtj flange exporter in india, duplex steel s32205 m&f flange chemical composition, duplex steel s32205 lap joint flange stockists, high quality duplex steel s32205 pipe flange specifications, type of duplex steel s32205 male-and-female flange mechanical properties, s32205 austenitic duplex steel long weld neck flanges, duplex steel s32205 welding neck flange, duplex steel s32205 flanges, duplex steel a182 s32205 tongue & groove flange, ansi b16.5 duplex steel s32205 sorf flange, duplex steel s32205 wnrf flange manufacturer in mumbai, alloy s32205 spectacle blind flanges supplier in mumbai, sus s32205 duplex steel industrial flanges price list, duplex steel s32205 industrial flanges dealer in mumbai, s32205 duplex steel slip on flange supplier in india, gr.s32205 steel pipe flange traders, s32205 duplex steel threaded flange price list in mumbai, asme b16.28 s32205 duplex steel swrf flange dimensions, duplex steel s32205 flanges, grade s32205 duplex steel reducing flanges, s32205 duplex steel asme sa182 threaded flanges, s32205 steel raised face flange price.

Champ Steel Process