Incoloy 800 Forged Fittings

Alloy 800 Socket-weld Fitting, Incoloy ASTM B564 Forged Fittings, Incoloy 800H Threaded Fittings, ASTM B564 Incoloy Alloy 800HT Fittings, Inconel® Alloy 800/800H/800HT High Pressure Forged Fittings, ASME/ANSI B16.11 Incoloy 800 Forged Elbow Supplier in Mumbai, India.

Alloy 800 Forged Fittings

Alloy Inconel 800 is chromium, iron, and nickel-based alloy that are having enough carburization and oxidation resistant at greater temperature. It is particularly useful for the greater-temperature tools at several industries. The best about alloy is that it is greatly chloride stress corrosion cracking resistance.

The manufacturing of the Inconel 800 forged fittings is done by using the very good quality of alloy. They produce the fittings according to international and national product quality standards and safety standards. The production of the same is done using the refine technology and modern tools under the strict guidance of a professional expert team. The quality control team is hired that are looking at the quality maintenance of the product so no poor quality of fittings is developed. This allows producers in making the good quality of forged fittings that a buyer expects.

Incoloy 800 Threaded Elbow, Incoloy 1.4876 Union, Incoloy Alloy UNS N08800 Couplings, Incoloy 800H Tee, ASME SB564 Inconel® Forged Screwed Plug Exporter, Alloy 800HT Forged Socket Weld Elbow Manufacturer in India.

The documents offered to the buyers are mainly for clearing the doubts regarding the quality and reliability factor of the produced ranges of fittings. The documents offered are like heat treatment chart, quality assurance plan, material traceability report, guarantee letter, packaging list, raw material test report, commercial invoice and fumigation certificate, etc.

The TC offered is inclusive of raw material certificate, third-party test report, radiography test report, and MTC as per EN 10204/3.1B.

Inconel 800 forged fittings are well tested by the industry to assure that no bad quality of product delivery is done. The tests like PMI/IGC test, hardness test, flattening/flaring test, macro/micro test, pitting resistance tests, etc are done.


Equivalent Grades
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 - X8NiCrAlTi32-21 XH32T
Specification

Specifications : ASTM B564 / ASME SB564

Dimensions : ASME B16.11, MSS SP-79, 83, 95, 97, BS 3799

Size :1/8" to 4" (DN6-DN100).

Type : Socketweld Fittings, Screwed-Threaded Fittings

Threaded fittings (NPT, BSP, BSPT) Pressure Class: 2000, 3000, 6000 LBS.

Socket-weld fittings (S/W) Pressure Class : 3000, 6000, 9000 LBS.

Types Of 800 Incoloy Forged Fittings

Incoloy 800 Forged Socket Weld Fittings

Incoloy 800 Socket Weld Fittings

Incoloy Alloy 800 Socket weld 90 Deg Elbow | Alloy 800H Socketweld 45° Elbow | 800HT Incoloy Forged Socket weld Equal Tee | UNS N08810 Socketweld Unequal Tee | Incoloy Alloy 800 Socket weld Equal Cross | Alloy 800H Socket-weld Cross Stockist | Incoloy Alloy 800HT Socketweld Half coupling | Alloy N08811 Forged Socket Weld Unequal Cross | DIN 1.4958 Socket Weld Equal Cross | Incoloy Alloy 800 Socketweld Cap | Incoloy Alloy 800 Socket weld Full coupling

Alloy 800 Forged Threaded Fittings

Incoloy 800 90° Threaded Elbow | Incoloy Alloy 800H Screwed 45 Deg Elbow | Incoloy B564 Threaded Tee | Incoloy Alloy 80HT Screwed-Threaded Cross | UNS N08800 Threaded Coupling | ASME B16.11 Alloy 800H Threaded Plug | Incoloy Alloy 800 Threaded Forged Unions MSS SP-83 | Incoloy 800HT Threaded Cap Stockholder | DIN 1.4859 Forged Threaded Bushing | 800 Incoloy Alloy Forged Screwed Hex Nipples

Incoloy 800 Forged Fittings Manufacturer
Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Al Ti
Alloy 800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
Alloy 800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
Alloy 800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Incoloy 800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %
Application Industry

Application Industry
  • 1
    Incoloy 800 Crosses & Tees

    used in Irrigation

  • 2
    Incoloy 800H Forged Cap or Plug

    used on the Pipe

  • 3
    Incoloy 800HT Elbow

    used in large industrial pipe

  • Chemical Industry
  • Oil & Gas Industry
  • Petrochemical Industry
  • Power Genration Industry
  • Sugar Industry
  • Food Processing Industry
  • Paper & Pulp Industry
  • Offshore and Onshore Services
People Also Searched For

incoloy 800 union bs 3799, incoloy 800h forged fittings exporter in india, incoloy alloy 800ht forged pipe fittings stockists in mumbai, incoloy alloy 1.4876 forged high pressure fittings dealer in mumbai, 800 incoloy astm b564 threaded fittings manufacturer in india, asme sb564 incoloy alloy n08800 forged fittings stockists in india, incoloy® 800h socket weld coupling, alloy n08811 welding boss, n08810 forged incoloy fittings stockholder in india, 800ht incoloy alloy 3000 lb screwed fittings, 800 forged steel fittings stockholder in mumbai, alloy 800h class 9000 lb socket weld fittings, grade 800ht incoloy socket weld fittings traders in mumbai, incoloy 800 forged socket-welding and threaded fittings suppliers in india, incoloy 800h forged fittings exporters in mumbai, incoloy alloy 800ht street elbows, incoloy® 800 threaded nipples, alloy 800h socket weld fittings dimensions, incoloy 800 threaded fittings manufacturers in mumbai, incoloy 800ht forged fittings supplier in mumbai, incoloy astm b564 threaded fittings classes, incoloy alloy 800/800h/800ht socket weld fittings pressure rating, incoloy alloy 1.4958 threaded forged fittings weight.

Champ Steel Process